GY24.6 - 7.5m Superyacht Open Tender
This is the concept design for a small open tender with plumb bow and deep "V" – shaped hull.
The boat design aims to give something a little bit sporty and aggressive, wile still delivering a classy and timelessly elegant looking boat.
The long waterline would provide sooth ride by reducing the pitch movement. Thanks to the wider chine in the bow sections and the spray rails the passengers can enjoy a dry trip.
This is a stylish and speedy transportation vessel between the mothership and the shore, which could also be used as a fun boat for fishing or diving.
The Tender, including its cockpit floor height, down flooding height and angles, cockpit drainage and stability requirements, will be designed to comply with European RCD requirements as appropriate and classified for CE approval category C
The tender is designed to be build using E-glass and carbon fibre in a sandwich and resin infusion technique.
Fitted with one Volvo 300 hp diesel engine and DPH Duoprop drive the tender can achieve a maximum speed of 38 knots and cruising speed of 32 knots. With 250 litre fuel tank, the range is around 250 miles.
When the windshields are folded down the stowed height is only 1.75m, which is designed to will help fit the tender in the usually limited spaces of the most motherships.
Some of the other features of included in this project:
- Bow thruster and trim control
- Deck shower, removable ski pole and carbon fibre swim ladder
Length (Waterline): 7.21 m
Beam Max: 2.65 m
Draught (mean) 0.48 m
Displacement (half load): 3200 kg
Engine: Volvo 300hp @ 3500 rpm
Drive Volvo DPH Duoprop
Fuel 250 Litres
Fresh Water 50 Litres
Classification CE Category C
Copyright 2012 GY Boat Design